Atlantik V2 just how to hook up to the Wi Fi Router or Control one or more light without router;
to get in touch the Atlantik V2.X to your property Wi Fi router you need to stick to the 11 actions.
1. Switch off all units.
2. Switch on just the unit that is first will link.
3. In your tablet pick the wifi-socket.
4. Open Chrome from your own type and tablet 192.168.1.100 when you look at the target club.
5. Username admin password 000000
6. Change mode to Sat.
7. Place your system password and SSID. ( Encryption constantly Disable : ( the system believe it is automaticly )
9. Head to system within the menu that is main and then click restart.
10. Head to wifi establishing once again and alter to your system router SSID.
11. get the Orphek software and do search id, it will discover the unit that is first.
Then do from 1 to 11 for the staying devices.
7. SSID : place your Router Wi-Fi Network Name ( SSID Name ).
When you look at the SSID field you shall key in your community title. This is certainly situation painful and sensitive therefore make sure to utilize money or letters that are small it’s proper. When you look at the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system think it is automaticly )
Select /Keep ,disable into the encryption field (never confuse with encryption key package). Your tablet will find the encryption automatically key in case the router supports it.
9. When you look at the left that is upper of UART display screen you certainly will a range of fundamental, Advanced, and System.
Select system TAB plus in the section that is first of web page you will observe a restart switch. Press the restart key. a screen look saying the web web browser cannot hook up to the internet protocol address. It is fine since you should should hook up to your router SSID.
10. On your own tablet /Phone connect with your wi-fi Router network SSID.
11.Open the Orphek software and then click the clear switch in the top right of this display. Now click on the search key situated on the left that is upper of display. Your system should get the tablet along with your brand new internet protocol address for your Orphek light should appear.
Perform steps 1 to 11 when it comes to remaining Orphek devices.
* choice : it is possible to set the internet protocol address fixed , for better connection
You will then check out:
A. Unchecked The Enable DHCP
B. Enter a fixed ip that belongs to your house router. For instance:
Then you can easily enter 100.168.20.2 or any internet protocol address between .2 and .254 In case the router is 100.168.20.1.
the ip should be unique if you don’t it’s going to result in a ip conflict
C. It’s also advisable to go into the submask as well as in most cases it really is 255.255.255.0.
D. Go into the Gateway Address : it must be your Router internet protocol address
E. Then perform some exact exact same towards the staying devices. BUT etch unit should have unique internet protocol address .
instance:
When your House Router set:
ssid: house
password : 12345678
internet protocol address 192.168.100.1
submusk 255.255.255.0
you then should set product 1
1.work type: Sta
2.SSID: house
3.Encryption Disable : ( the system believe it is automaticly )
4.Encryption key: 12345678
5.then click Save
6. Unchecked The Enable DHCP
7. set : internet protocol address: 192.168.100.10
8. set :submusk: 255.255.255.0
9. set Gateway Address 192.168.100.1
11. Head to system within the primary menu, and then click restart.
12. go the Orphek application and do search id, it will get the unit that is first.
you then should set product 2 –
OBS: First turn OFF product 1 (therefore be no any internet protocol address conflict )
1.work type: Sta
2.SSID: house
3.Encryption Disable : ( the system think it is automaticly )
4.Encryption key: 12345678
5.then click Save
6. Unchecked The Enable DHCP
7. set : internet protocol address: 192.168.100. 11
8. set :submusk: 255.255.255.0
9. set Gateway Address 192.168.100.1
11. Head to system when you look at the main menu, and then click restart.
12. get the Orphek application and do search id, it must find unit 2 .