More In This Section Click to reveal navigation links on mobile.
Who to get hold of
ITS Service Center
- Setup the projector dealing with the display screen, and plug within the charged cord. Set your laptop beside the projector.
- Plug one end of VGA cable (shown above) to the COMPUTER 1 IN slot in the projector.
- Plug the other end for the VGA cable into the laptop computer’s monitor slot. For those who have a display adapter for the laptop computer, link that to your VGA cable before linking it to your laptop.
- Start your laptop computer first. Then start the projector by very first turning energy switch to | and then push the utmost effective power button. The lamp will require a moment to heat up and show. If you have a display issue, continue steadily to step 5.
- Change your monitor ( simply click on your own laptop type below for details): Windows InstructionsMacintosh Instructions
Windows Instructions
In your laptop computer, hold straight down the FN key and press the display key (the F key with all the monitor icon) to improve your display.
You might be served with the possibility to select what you need to complete:
Once you’ve set the display mode, you may have to adjust the your laptop computer’s quality to 
1024×768.
- Right-click on your own desktop background and select characteristics or Graphic characteristics. -or-
- Go through the Settings tab or General Settings and also make yes the display screen quality is scheduled to 1024×768. -or-
- Click on Apply then OK .
- Maintain with #6 below.
Macintosh Guidelines
- Head to Apple menu>System choices.
- Choose Displays preference, go to Arrangement then tab.
- Select Identify Displays switch.
- Check out the Mirror shows checkbox if you like the same display to appear on the projector.
- Always always Check Show displays in menu club , select 1024×768 under then LCD Projector regarding the menu club pulldown:
You will need to choose Display Preferences… There will be a pane on your MacBook and a pane on the Projector if 1024×768 is not an option. Find the projector pane and set to 1024×768 utilising the cheapest frequency.
In the event that you nevertheless don’t experience a display after following these instructions, check out the supply in the projector. Listed here are two projector that is different plans:
Select COMPUTER 1 input key
OR
Choose SOURCE key, make use of the arrow tips to choose COMPUTER 1, then push the ENTER key.
When you are finished with all the projector, please push the top energy key twice to permit the fan to switch on and cool off before unplugging the energy cord.
TROUBLESHOOTING
Then try switching the display once again if the projector is still not projecting your laptop after following the instructions above, check to be sure all connections are plugged in all the way, and. If you’re nevertheless struggling to link, please call x3407 for support.